Digisat Pro Satellite Finder
Brand new complete with 12 months manufacturers warranty.
This fully featured satellite finder with digital screen is ideal for setting up any motorised or fixed dish system; whether you are experienced or not. The Digisat Pro Satfinder can be directly powered by the receiver, or from an external 12V-18V source (not supplied). A further offering is the Diseqc switch testing and will check both LNB's at once in a two-Satellite diseqc system. These meters are very sensitive & can detect weak signals; work very well throughout Europe. Much easier to use than the cheaper needle signal finders.
- Satfinder that measures on 2 LNB's at the same time
- All the measurement information is presented on the LCD
- DiSEqC, 22KHz, 13/18V and mA identification
- Able to transmit 22KHz and DiSEqC to the LNB/switch
- Works also as a 2-way switch (13/18V, 22KHz and DiSEqc)
- Runs DiSEqC 1.2/Satscan actuator (East/West and reset)
- Built in beeper, higher ton better signal
- Very sensitive, easy to maximize weak and strong signals
- 950-2150 MHz input frequency
- F-connectors, CE-approver
Digisat Pro Technical Specification
Input frequency: 2 x 950-2200 MHz.
Input level: 20-100 dBuV.
Through loss: 5 dB.
Input impedance: 75 Ohm, F-connectors.
Output impedance: 75 Ohm, F-connector.
Short circuit protection: Automatic fuses on all inputs.
Measuring method: Signal presentation on LCD display in form of thermometer scales or three digit number. Pitch-tone indication on loudspeaker.
Max-level: Thermometer-scales showing max. Three digit numbers showing highest value. Highest tone on loudspeaker. Maxhold-function.
Voltmeter: Voltmeter 0-30 volt. 0-900 mA.
Indications: Voltage, current. 22 kHz (on/off). MiniDiSEqC (toneburst). DiSEqC 1.0 and 1.1
Transmitting: 22 kHz (on/off). MiniDiSEqC (toneburst). DiSEqC 1.0 and 1.1
Actuator control: DiSEqC 1.2 NOKIA (SatScan) TRIAX H/H
Powersupply: From receiver via coaxial cable. External DC-power supply 12-18V Centerpin +
Power consumption: Ca 35 mA without loudspeaker. Ca 50 mA with loudspeaker
Weight: 0.1 kg
Dimensions: 145 x 55 x 20 mm.
|
